I worked with Rehab on this project for workspace.
We made a container for boxes of components.
All cut with power 65 and speed 45.
All scan with power 30 and speed 150.

Step 1:

I made a horizontal layers with length
4*(Box width 40mm + Clearance 0.1mm) + 3*Vertical thickness 0.3mm + 2*Side thickness 0.6mm.

Step 2:

I made a layer to hold leds with the same length of horizontal layer.

Step 3:

I made vertical Spacers between boxes in first and last rows with length
2*thickness of horizontal layer + length of box + clearance.

Step 4:

I made vertical Spacers between boxes in second and third row with length
2*thickness of horizontal layer + length of box + clearance.

Step 5:

Finally we cut these files.

Step 4:

try 4

Step 5:

try 5